Mapping confirms new high-priority target zone at Andover
Released
Released
Announcement PDF
ASX RELEASE | 23 September 2024
MAPPING CONFIRMS NEW HIGH-PRIORITY
TARGET ZONE AT ANDOVER SOUTH LITHIUM
PROJECT
Highlights
•
ASX CODE: RDN
Target Zone 7 (Refer Figure 2) pegmatites extended 650m
along a north-west strike extent
•
Zone 7 may represent a dislocated strike extent of highpriority Target Area1
•
Work to date has defined seven target zones on the Andover
South project - key priority target areas will be drill tested during
maiden drilling program
•
Target zone 7 is characterised by a high degree of
fractionation (potassium/rubidium (K/Rb) ratio) of the
pegmatites, indicating potential for Lithium-Caesium-Tantalum
(“LCT”) mineralisation
•
Potential 4.2km strike of the key target zones (1 to 7) across the
entire Andover South pegmatite field
•
Next steps: detailed mapping and potentially including target
zone 7 in maiden drilling program
Raiden Resources Limited (ASX: RDN DAX: YM4) (“Raiden” or “the
Company”) is pleased to announce the latest results from mapping
and pegmatite analysis conducted by Raiden and CSA Global
geologists across the Andover South Lithium Project tenements.
DAX CODE: YM4
BOARD &
MANAGEMENT
Non-Executive
Chairman
Mr Michael Davy
Managing Director
Mr Dusko Ljubojevic
Non-Executive Director
Mr Dale Ginn
Non-Executive Director
& Company Secretary
Ms Kyla Garic
Chief Operating Officer
Mr Sean Halpin
ASSET PORTFOLIO
SERBIA
Cu & Au
BULGARIA
Cu, Au & Ag
AUSTRALIA
Li, Au, Cu, Ni & PGE
Mr Dusko Ljubojevic, Managing Director of Raiden commented: “One of
the key objectives of the follow up mapping program was to determine the
extent of target area 1 along the western strike extent. Target area 1 is the key target for the Company
in the upcoming maiden drill program, where pegmatites are characterised by high fractionation and
high grade Li2O mineralisation. As a result, we have determined that the highly fractionated pegmatites
on the western periphery of Target Area 1 may have been structurally offset, resulting in a northPage 1 of 15
P 08 6158 9990 F 08 6268 4926
Suite 7, 63 Shepperton Road, Victoria Park, 6100
Australia
ASX RELEASE | 23 September 2024
western strike extent. This work has defined further high-priority targets which the Company will
evaluate in the near future.”
Andover South Field Program
The Company re-engaged CSA Global (now renamed ERM) to assist in a further field
sampling program at the Andover South pegmatite project in the Pilbara. This most recent
field program included mapping of previously undefined pegmatites and analysis of the
outcrop minerology with the objective of:
1) Sampling and analysis of Potassium-Feldspar (“K-Feldspar”) minerals collected from
pegmatites, to determine fractionation states (Highly fractionated pegmatites are more
likely to host lithium-caesium-tantalum (LCT) mineralisation)
2) Extending previously defined fractionation trends into unmapped/unsampled areas of
the Andover South pegmatite field
3) Analysis of the fractionation trends (potassium/rubidium ratio (K/Rb), as a guide to define
additional potential zones of interest in areas with pegmatites for drill planning, and
4) Re-evaluate in the field pegmatites which returned low Li2O values, to determine their
degree of fractionation and potential for LCT mineralisation, not confirmed by sampling
to date
Page 2 of 15
ASX RELEASE | 23 September 2024
Figure 1: Raiden’s Andover South Project and adjacent Azure Minerals Ltd.’s Andover Lithium
project1
The following are the key observations of the recent field work:
•
•
•
A total of 91 sample locations were visited, including revisiting known pegmatites
and their extensions, and an assessment of recently defined pegmatite outcrops.
The collected K/Rb fractionation data from K-Feldspars were added to the
existing database
In the northwestern part of E47/4062 tenement, several new pegmatite outcrops
were identified and mapped. They appear to be consistently striking in a NW-SE
direction (Figure 2). On average, the noted pegmatite outcrops are up to 2m in
width and extend across an approximate strike length of 650m. At this time the
dip direction could not be determined from the surface outcrops.
Key field observations are:
o K-Feldspar K/Rb data from these pegmatites indicate they are all
highly fractionated (<20), with a significant portion being <10, which
is consistent with the mineralised pegmatites to the east (main target
zone 1). On the basis of these observations, the target 7 pegmatites are
Page 3 of 15
ASX RELEASE | 23 September 2024
considered as priority targets and management plan to evaluate the zone
in further detail, in order to make a decision on whether they will be drill
tested during the maiden drill campaign.
As stated in the previous announcement relating to the K-feldspar fractionation at Andover
South2, and in reference to a global dataset of K-feldspar K/Rb fractionation data (provided
by CSA Global), which indicates that pegmatites globally, with a K/Rb value of <30, have
the highest potential to host lithium mineralisation, it was determined that:
•
The K-feldspar fractionation data from the Andover South pegmatites specifically
indicate that the high-grade lithium mineralisation is associated with K/Rb
values of <10.
The most fractionated pegmatites in the Project area have K/Rb values of <10 and have
coincident anomalous Cs and Ta. These very highly fractionated pegmatites correspond to
rock chip samples with significantly elevated Li2O (up to 3.80% Li2O3) and observed
spodumene mineralisation. Within the Andover South pegmatite system a K/Rb of <10 is
indicative of a potentially mineralised pegmatite. Therefore, where additional pegmatites
with Li2O rock chip assay results were low or were not sampled for assay, they still have the
potential to host lithium mineralisation.
Page 4 of 15
ASX RELEASE | 23 September 2024
Figure 2: Andover South Project – zones of interest based on fractionation analysis of pegmatites,
with recently defined zone 7 highlighted in red2
Summary of previously defined target zones & target zone 7:
•
•
•
Target zone 1 – has been extended across an approximate 2.5km strike extent within
tenement E47/4062, with defined pegmatites which correlate to high-grade Li2O
mineralisation. The K/Rb ratio data also indicates that the pegmatites in this zone are highly
fractionated.
Target zone 2 – is defined on the northern extent, and subparallel, to Target area 1. Multiple
pegmatites have been mapped, but the initial sampling results did not indicate economic
mineralisation. The K/Rb data analysis of these pegmatites indicates that the pegmatites are
highly fractionated.
Target zone 3 – is located on the eastern strike extent of Target zone 1, within tenement
E47/4061 and is characterised by outcropping pegmatites, low lithium mineralisation rock
samples, but indicated as highly fractionated by the K/Rb ratio analysis.
Page 5 of 15
ASX RELEASE | 23 September 2024
•
•
•
•
Target zone 4 – is located adjacent to Target zone 3 on E47/4061 and is characterised by
outcropping pegmatites, low lithium mineralisation from samples collected to date, however
it is defined a potentially permissive zone for LCT mineralisation, as per the K/Rb ratio analysis.
Target zone 5 – is located on the southern extent of E47/4062 and characterised as potentially
permissive for LCT mineralisation, as per the K/Rb ratio analysis.
Target zone 6 – is located on the western extent of E47/4062, and is also characterised by
outcropping pegmatites, which are potentially permissive for LCT mineralisation, as per the
K/Rb ratio analysis.
Target zone 7 – is located on the north-western part of E47/4062 tenement. The zone
is characterised by a swarm of North-West trending pegmatites over an approximate
strike extent of 650m. According to K/Rb ratio analysis, the pegmatites are highly
fractionated and considered to be highly prospective for LCT mineralisation.
It should also be noted that a significant portion of the Andover South project is obscured
by a thin sedimentary cover. These areas continue to be evaluated with the objective of
defining new potential target zones. This work will be undertaken in parallel with the maiden
diamond drilling program on the key target areas due to commence during September 2024.
This ASX announcement has been authorised for release by the Board of Raiden
Resources Limited.
FOR FURTHER INFORMATION PLEASE CONTACT
DUSKO LJUBOJEVIC
Managing Director
RAIDEN RESOURCES LIMITED
info@raidenresources.com.au
www.raidenresources.com.au
ASX Announcements referenced to directly in this release
1
ASX:AZS 18 September 2023 Andover Delivers More Outstanding Lithium Results
2
ASX:RDN 22 December 2023 Independent analysis confirms five new zones at Andover
3
ASX:RDN 09 November 2023 Exceptional lithium results & additional spodumene XRD
Page 6 of 15
ASX RELEASE | 23 September 2024
The information referenced in announcements footnoted at 2 to 3 above that relate to exploration results have
previously been released on the ASX. The Company confirms that it is not aware of any information or data that
materially affects the information included in the market announcements, and that all material assumptions and
technical parameters continue to apply. The Company confirm that the form and context in which the Competent
Person’s findings are presented have not been materially modified from the original market announcements.
Competent Person's Statement
The information in this announcement that relates to exploration results, is based on and fairly represents
information and supporting documentation, and has been reviewed and approved by Mr Sean Halpin, a
competent person who is a member of the Australian Institute of Geoscientists (AIG). Mr Sean Halpin is employed
by Raiden Resources Limited. Mr Sean Halpin has sufficient experience that is relevant to the style of
mineralisation and type of deposits under consideration and to the activity being undertaken to qualify as a
Competent Person as defined in the 2012 edition of the JORC Code. Mr Sean Halpin has provided his prior written
consent as to the form and context in which the exploration results and the supporting information are presented
in this announcement.
Appendix
Table 1: Tenement Schedule
Tenement
E47/4061
E47/4062
E47/4063
E47/3849
P47/2028
E47/4603
Holder
Pilbara Gold Corporation
Pty Ltd
(Raiden Resources Ltd.’s
100% owned subsidiary)
Grant Date
Expiry
06/08/2019 05/08/2029
30/08/2024 29/08/2029
04/04/2019 03/04/2029
16/07/2018 15/07/2028
Application
Application
Area
1Bl
2Bl
2Bl
1Bl
23.5 Ha.
7Bl
RDN
%
80%
80%
80%
80%
80%
100%
Disclaimer:
Forward-looking statements are statements that are not historical facts. Words such as “expect(s)”, “feel(s)”,
“believe(s)”, “will”, “may”, “anticipate(s)”, “potential(s)”and similar expressions are intended to identify forwardlooking statements. These statements include, but are not limited to statements regarding future production,
resources or reserves and exploration results. All of such statements are subject to certain risks and
uncertainties, many of which are difficult to predict and generally beyond the control of the Company, that
could cause actual results to differ materially from those expressed in, or implied or projected by, the forwardlooking information and statements. These risks and uncertainties include, but are not limited to: (i) those
relating to the interpretation of drill results, the geology, grade and continuity of mineral deposits and
conclusions of economic evaluations, (ii) risks relating to possible variations in reserves, grade, planned mining
dilution and ore loss, or recovery rates and changes in project parameters as plans continue to be refined, (iii)
the potential for delays in exploration or development activities or the completion of feasibility studies, (iv)
risks related to commodity price and foreign exchange rate fluctuations, (v) risks related to failure to obtain
adequate financing on a timely basis and on acceptable terms or delays in obtaining governmental approvals
Page 7 of 15
ASX RELEASE | 23 September 2024
or in the completion of development or construction activities, and (vi) other risks and uncertainties related to
the Company’s prospects, properties and business strategy. Investors are cautioned not to place undue reliance
on these forward-looking statements that speak only as of the date hereof, and the Company does not
undertake any obligation to revise and disseminate forward-looking statements to reflect events or
circumstances after the date hereof, or to reflect the occurrence of or non-occurrence of any events.
About Raiden Resources
Raiden Resources Limited (ASX:RDN / DAX:YM4) is a dual listed lithium, base metal—gold exploration
Company focused on the Andover North-South; Mt Sholl and Arrow lithium projects. The Company also holds
the rights to the advanced Mt Sholl nickel-copper-cobalt- PGE project in the Pilbara region of Western
Australia. In addition, the Company holds the rights , as well as the emerging and prolific Western Tethyan
metallogenic belt in Eastern Europe, where it has established a significant exploration footprint in Serbia and
Bulgaria.
The Directors believe the Company is well positioned to unlock value from this exploration portfolio and deliver
a significant mineral discovery.
Page 8 of 15
ASX RELEASE | 23 September 2024
JORC Code, 2012 Edition. Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips,
or specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down
hole gamma sondes, or handheld XRF instruments, etc). These
examples should not be taken as limiting the broad meaning of
sampling.
• Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material
to the Public Report.
• In cases where ‘industry standard’ work has been done this
would be relatively simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so, by
what method, etc).
• Method of recording and assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Rock chip sampling taken opportunistically from
pegmatite outcrop during a dedicated mapping and
sampling program.
• Pegmatite was identified in outcrop.
• The rock chip samples were restricted to outcrop of
potential pegmatitic rocks.
• K-feldspar sampling was undertaken by collecting
these suitable K-feldspar crystals in the field using a
cold chisel and hammer, numbering them, and
recording their location for later analysis by pXRF in
an office environment.
Drilling
techniques
Drill sample
recovery
Page 9 of 15
• In relation to this announcement no drilling has been
conducted as yet and no drill assays are being reported
• In relation to this announcement no drilling sampling
has been conducted as yet and no drill assays are being
reported
ASX RELEASE | 23 September 2024
Criteria
Logging
Sub-sampling
techniques and
sample
preparation
JORC Code explanation
• Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
• Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of the relevant intersections
logged.
• If core, whether cut or sawn and whether quarter, half or all
core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of
the sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages
to maximise representivity of samples.
• Measures taken to ensure that the sampling is representative of
the in situ material collected, including for instance results for
field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the
material being sampled.
Commentary
• In relation to this announcement no drilling has been
conducted as yet.
• Rock chip sample results have not yet been received
from this latest sampling program
• K-feldspar samples were identified in the field by
experienced geologists and analysed by pXRF
analysis using an Olympus Vanta M-series pXRF
analyser. The analyser was calibrated to detect for
LCT-pegmatite-suite elements (including K, Cs, Rb,
Sn, Ta, and Nb). K-feldspar and mica books collected
from pegmatites and pegmatoidal granites were
analysed by directly pointing the detector at the
specimen and using the targeting camera to centre the
detection over clean areas of the mineral, free from
obvious inclusions, artefacts, and fractures. Where
feldspar crystals were small and perthitic, repeat
analyses were collected to get the highest
concentration of K-feldspar and most reliable
indication of degree of fractionation
Summary results of pXRF analyses of K-feldspar from Andover
South pegmatites (n=220)
Min
Max
Mean
Page 10 of 15
ASX RELEASE | 23 September 2024
Criteria
JORC Code explanation
Commentary
Rb
Cs
Sn
Nb
Ta
828
<LOD
<LOD
<LOD
<LOD
36976
1167
71
32
180
10414
135
4
4
79
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the analysis
including instrument make and model, reading times,
calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (ie lack of bias) and precision have
been established.
• Rock chip sample results have not yet been received
from this latest sampling program
Verification of
sampling and
assaying
• The verification of significant intersections by either independent
or alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• All previous significant assay results have been
Location of data
points
• Accuracy and quality of surveys used to locate drill holes (collar
and down-hole surveys), trenches, mine workings and other
locations used in Mineral Resource estimation.
• Specification of the grid system used.
• Sample points were determined by hand held GPS
which is considered appropriate for the
reconnaissance nature of the sampling.
• Co-ordinates are provided in the Geocentric Datum of
Page 11 of 15
verified against the results reported by ALS Global
Perth by two experienced company personnel.
• All primary data has been uploaded into the
company’s data storage with standard data entry
protocols checked and verified by two experienced
company personnel.
• K-feldspar pXRF results have been verified by one
company geologist and one consultant from CSA
Global as part of their report to the company.
ASX RELEASE | 23 September 2024
Criteria
JORC Code explanation
• Quality and adequacy of topographic control.
Data spacing and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
• Whether sample compositing has been applied.
Orientation of data • Whether the orientation of sampling achieves unbiased sampling
in relation to
of possible structures and the extent to which this is known,
geological
considering the deposit type.
structure
• If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and reported
if material.
Sample security
• The measures taken to ensure sample security.
Audits or reviews
• The results of any audits or reviews of sampling techniques and
data.
Commentary
Australia (GDA94) Zone 50.
• Not applicable due to the reconnaissance nature of the
sampling.
• No attempt has been made to demonstrate geological
or grade continuity between sample points.
• Not applicable
• For the current sampling program the sample chain of
custody is managed by Raiden. All samples were
collected in the field at the project site in numbercoded calico bags/secure labelled polyweave sacks by
Raiden’s geological and field personnel.
• No review of the sampling techniques has been
undertaken.
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral tenement
and land tenure
status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
• Raiden Resources Ltd tenements are located in the
City of Karratha, within the Pilbara region of
Western Australia.
• Refer to Appendix 1, Tenement Schedule
Page 12 of 15
ASX RELEASE | 23 September 2024
Criteria
Exploration done
by other parties
Geology
Page 13 of 15
JORC Code explanation
Commentary
settings.
• Tenements E47/4062, E47/4061, E47/4063, and
• The security of the tenure held at the time of reporting along with
E47/3849 are granted tenure while P47/2028 is in the
any known impediments to obtaining a licence to operate in the
application stage.
area.
• Tenements are located on the Mt Welcome pastoral
lease.
• Raiden is not aware of any existing impediments nor
of any potential impediments which may impact
ongoing exploration and development activities at the
project sites.
• Acknowledgment and appraisal of exploration by other parties.
• A search and compilation of historic exploration has
been completed.
• Work included stream sediment, soil and rock
sampling, geological mapping, and geophysical
surveys.
• Deposit type, geological setting and style of mineralisation.
• Potential for lithium-caesium-tantalum bearing
pegmatite mineralisation.
• Andover Project geological setting – previous
explorers considered the area to be part of the Ruth
Well Formation (Mafic and ultramafic volcanic and
intrusive rocks; minor chert; metamorphosed),
however a recent interpretation by the company
shows that the rocks of the Andover
Intrusion/Complex (Archean-age mafic-ultramafic
intrusion) extend under cover further to the north
than previously suggested.
• It is further interpretated that the source of
mineralising fluids for the lithium pegmatites are
sourced from nearby felsic intrusive bodies, these
being the Black Hill Well Monzogranite for the
Andover Project area.
ASX RELEASE | 23 September 2024
Criteria
JORC Code explanation
Commentary
Drill hole
Information
• A summary of all information material to the understanding of
the exploration results including a tabulation of the following
information for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the basis that
the information is not Material and this exclusion does not
detract from the understanding of the report, the Competent
Person should clearly explain why this is the case.
• In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations (eg
cutting of high grades) and cut-off grades are usually Material
and should be stated.
• Where aggregate intercepts incorporate short lengths of high
grade results and longer lengths of low grade results, the
procedure used for such aggregation should be stated and some
typical examples of such aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent
values should be clearly stated.
• These relationships are particularly important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are reported,
there should be a clear statement to this effect (eg ‘down hole
length, true width not known’).
• Appropriate maps and sections (with scales) and tabulations of
• Not applicable
Data aggregation
methods
Relationship
between
mineralisation
widths and
intercept lengths
Diagrams
Page 14 of 15
• Not applicable
• Not applicable
• Maps are included in the body of the announcement.
ASX RELEASE | 23 September 2024
Criteria
Balanced
reporting
JORC Code explanation
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view
of drill hole collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high
grades and/or widths should be practiced to avoid misleading
reporting of Exploration Results.
Other substantive
exploration data
• Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk
samples – size and method of treatment; metallurgical test
results; bulk density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
Further work
• The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling
areas, provided this information is not commercially sensitive.
Page 15 of 15
Commentary
• All reported results from other companies are as they
have been released to the ASX and are referenced at
the end of this announcement.
• This announcement discusses the findings of recent
reconnaissance sampling and associated assays.
• The underlying aeromagnetic data that forms the
basis for reinterpretation of the Andover Complex
rocks, as described in the body of previous
announcements by Raiden, was sourced from open
file GSWA data available through the MAGIX
system at:
• https://geodownloads.dmp.wa.gov.au/downloads/geo
physics/72204/WA_Magnetics_40m/
• Raiden are currently planning drilling to further
assess the potential for lithium-bearing pegmatites
over its Andover Project
Share your feedback
Discover