Multiple lithium soil anomalies defined at Mt Sholl project
Released
Released
Announcement PDF
ASX RELEASE | 5th December 2023
MULTIPLE LITHIUM SOIL ANOMALIES
DEFINED AT MT SHOLL PROJECT
Highlights
•
ASX CODE: RDN
Soil sampling program has defined several clear lithium in soil
trends at Mt Sholl Lithium Project
•
Soil geochemistry delineates a Lithium in soil trend with 3.5km
strike length and with peak value of 138.5ppm Lithium (298ppm
Li2O), extending across the north-central part of the tenement
•
A Lithium in soil trend with 2.5km strike length, with peak
value of 187.5ppm Lithium (404ppm Li2O), defined in the southeastern part of the permit
•
•
Defined anomalies are located along strike to GreenTech Metals
Ltd (ASX:GRE) Osbourne JV pegmatite discovery1
Detailed follow up program will be initiated in early parts of Q1
with objective to define drill targets for testing in ‘24
DAX CODE: YM4
BOARD &
MANAGEMENT
Non-Executive
Chairman
Mr Michael Davy
Managing Director
Mr Dusko Ljubojevic
Non-Executive Director
Mr Dale Ginn
Non-Executive Director
& Company Secretary
Ms Kyla Garic
Chief Operating Officer
Mr Warrick Clent
ASSET PORTFOLIO
Raiden Resources Limited (ASX: RDN) (“Raiden” or “the
Company”) is pleased to announce the results of a soil sampling
program for the Mt Sholl North Project.
SERBIA
Cu & Au
BULGARIA
Cu, Au & Ag
AUSTRALIA
Mr Dusko Ljubojevic, Managing Director of Raiden commented:
Li, Au, Cu, Ni & PGE
“These recent results from the Mt Sholl campaign have defined multiple
anomalous lithium trends within the property. The fact that the
anomalies are within the same district and along strike from a recent
pegmatite discovery on the adjoining property, provide further
encouragement that the anomalies may be associated with a mineralised system.
Management plan to initiate a detailed follow up work campaign in order to refine the
anomalous trends and hopefully define drill targets on the Mt Sholl lithium project. Over the
past several months, the Company has been undertaking targeting work over multiple
properties and we are very pleased that the work is yielding positive results, that will hopefully
lead to multiple drill programs.”
Page 1 of 14
P 08 6158 9990 F 08 6268 4926
Suite 7, 63 Shepperton Road, Victoria Park, 6100
Australia
ASX RELEASE | 5th December 2023
In order to evaluate the potential for lithium bearing pegmatites on the northern parts of
the Mt Sholl project, which is considered the most prospective, the Company executed a soil
sampling program over the tenement2 during October. The samples were analysed for the
full suite of LCT elements, as well as other elements.
The objective of the program was to assist in defining the most prospective areas of the
project, as well as provide insight into the potential zoning of the mineralised system, define
the direction and location of the potential source granites and highlight any structural trends
which may act as hosts for mineralised pegmatites. While a significant part of Mt Sholl
project is outcropping, certain parts of the project area are obscured by transported cover
making soil sampling an integral exploration tool for the area.
On the basis of the results to date, several distinct geochemical trends have been defined. A
+30ppm lithium soil trend in the central western part of the permit area extends along a
3.5km east-west trending corridor, with peak values of 138.5ppm lithium. The strike of the
trend aligns with GreenTech Metals Ltd1 (ASX:GRE) released lithium-in-soil anomalies,
positive rock sampling, and their recently announced intersection of pegmatites in drilling
(Figure 1). The highest values are in the western part of the project area.
A >50ppm lithium soil anomaly in the southern part of the license extends over a 2.5km
strike extent, with a peak value of 187.5ppm lithium. This trend does not seem to be
associated with any of the known anomalies/trends in the district and is a new target area
which the Company will evaluate through the upcoming programs.
Page 2 of 14
ASX RELEASE | 5th December 2023
Figure 1: Mt Sholl Project with the results of Raiden’s lithium soil sampling program, in relation to
GreenTech Metals Ltd’s Osbourne JV results1
Planned work
Further work is being planned for follow-up programs in the early-2024.
This will include a detailed analysis of the regolith in relation to these soil anomalies. In
addition, previously mapped structures, and a re-evaluation Raiden’s aeromagnetic data will
be used to target for potential concealed structures, which may act as potential hosts of LCT
pegmatite mineralisation.
Page 3 of 14
ASX RELEASE | 5th December 2023
Figure 2: Raiden’s Mt Sholl lithium project in relation to Raiden’s Pilbara portfolio of projects,
infrastructure and key discoveries in the district
This ASX announcement has been authorised for release by the Board of Raiden
Resources Limited.
FOR FURTHER INFORMATION PLEASE CONTACT
DUSKO LJUBOJEVIC
Managing Director
RAIDEN RESOURCES LIMITED
dusko@raidenresources.com.au
www.raidenresources.com.au
ASX Announcements referenced to directly in this release
1
ASX:GRE 29 November 2023 Maiden diamond Hole completed Osborne Joint Venture
2
ASX:RDN 10 August 2023 Raiden Commences Lithium Exploration Program
Page 4 of 14
ASX RELEASE | 5th December 2023
Competent Person's Statement and Previously Reported Information
The information in this announcement that relates to exploration results is based on and fairly represents
information and supporting documentation, and has been reviewed and approved by Mr Warrick Clent, a
competent person who is a member of the Australasian Institute of Mining and Metallurgy (AusIMM). Mr Warrick
Clent is employed by Raiden Resources Limited. Mr Warrick Clent has sufficient experience that is relevant to the
style of mineralisation and type of deposits under consideration and to the activity being undertaken to qualify
as a Competent Person as defined in the 2012 edition of the JORC Code. Mr Warrick Clent has provided his prior
written consent as to the form and context in which the exploration results and the supporting information are
presented in this announcement.
Disclaimer:
Forward-looking statements are statements that are not historical facts. Words such as “expect(s)”, “feel(s)”,
“believe(s)”, “will”, “may”, “anticipate(s)”, “potential(s)”and similar expressions are intended to identify forwardlooking statements. These statements include, but are not limited to statements regarding future production,
resources or reserves and exploration results. All of such statements are subject to certain risks and
uncertainties, many of which are difficult to predict and generally beyond the control of the Company, that
could cause actual results to differ materially from those expressed in, or implied or projected by, the forwardlooking information and statements. These risks and uncertainties include, but are not limited to: (i) those
relating to the interpretation of drill results, the geology, grade and continuity of mineral deposits and
conclusions of economic evaluations, (ii) risks relating to possible variations in reserves, grade, planned mining
dilution and ore loss, or recovery rates and changes in project parameters as plans continue to be refined, (iii)
the potential for delays in exploration or development activities or the completion of feasibility studies, (iv)
risks related to commodity price and foreign exchange rate fluctuations, (v) risks related to failure to obtain
adequate financing on a timely basis and on acceptable terms or delays in obtaining governmental approvals
or in the completion of development or construction activities, and (vi) other risks and uncertainties related to
the Company’s prospects, properties and business strategy. Investors are cautioned not to place undue reliance
on these forward-looking statements that speak only as of the date hereof, and the Company does not
undertake any obligation to revise and disseminate forward-looking statements to reflect events or
circumstances after the date hereof, or to reflect the occurrence of or non-occurrence of any events.
About Raiden Resources
Raiden Resources Limited (ASX:RDN / DAX:YM4) is a dual listed lithium, base metal—gold exploration
Company focused on the Andover North-South, Mt Sholl and Arrow lithium projects. The Company also holds
the rights to the advanced Mt Sholl nickel-copper-cobalt-PGE and the Arrow gold projects in the Pilbara region
of Western Australia. In addition, the Company holds the rights, as well as the emerging and prolific Western
Tethyan metallogenic belt in Eastern Europe, where it has established a significant exploration footprint in
Serbia and Bulgaria.
The Directors believe the Company is well positioned to unlock value from this exploration portfolio and deliver
a significant mineral discovery.
Page 5 of 14
ASX RELEASE | 5th December 2023
Appendix
Table 1: Soil Sampling Significant Results Sorted Highest to Lowest
Significant Assays Li ppm >=50 ppm
Sample ID
Easting
GDA 94_Z50
Northing
GDA 94_Z50
Li
ppm
Cs
ppm
Rb
ppm
Ta
ppm
MSS0449
MSS0671
MSS0665
MSS0670
MSS0450
MSS0585
MSS0666
MSS0574
MSS0668
MSS0379
MSS0584
MSS0065
MSS0392
MSS0561
MSS0667
MSS0669
MSS0515
MSS0600
MSS0391
MSS0643
MSS0672
MSS0510
MSS0317
MSS0601
MSS0445
MSS0389
MSS0549
MSS0513
MSS0586
MSS0662
MSS0356
MSS0417
MSS0443
MSS0061
MSS0448
MSS0067
MSS0114
MSS0673
MSS0073
MSS0599
MSS0416
MSS0457
MSS0459
MSS0545
MSS0537
MSS0511
MSS0064
491268
488270
488270
488270
491268
492868
488270
492468
488270
490868
492868
488468
490868
492468
488270
488270
491668
492868
490868
492770
488270
491668
490468
492868
491268
490868
492068
491668
492868
488270
490468
490868
491268
488468
491268
488468
488868
488270
488468
492868
490868
491268
491268
492068
492068
491668
488468
7690113
7690910
7691210
7690960
7690163
7689913
7691160
7690663
7691060
7689713
7689863
7690963
7690363
7690013
7691110
7691010
7690313
7690663
7690313
7689910
7690860
7690063
7689713
7690713
7689913
7690213
7690713
7690213
7689963
7691360
7691663
7691613
7689813
7690763
7690063
7691063
7690863
7690810
7691363
7690613
7691563
7690513
7690613
7690513
7690113
7690113
7690913
187.5
138.5
132
125.5
114.5
108
100.5
89.1
87.8
84.2
82.8
82.6
80.1
78.9
76.9
76.4
75.7
74.5
74.3
74.3
73.7
73.6
72
70.3
68.4
66
64.1
63.5
63.4
62.8
62.6
62.6
62.4
61.8
61.7
60.8
59.6
59.5
59.3
59
58.9
58.8
58.7
58.3
57.3
57.2
57.1
103
2.65
4.34
3.84
26.5
4.11
4.75
3.49
2.7
4.53
5.56
2.87
2.72
4.07
3.59
2.78
26
3.55
6.06
3.7
2.77
6.44
3.51
3.64
6.69
10.9
3.9
9.69
3.57
5.85
3.42
4.21
5.24
4.96
40.1
3.49
3.5
3.12
3.81
4.08
4.04
3.83
6.39
4.61
4.66
10.55
3.14
406
44.5
81.5
56.2
266
188.5
52.6
143
61
97.4
216
60.1
57.6
123
53.8
47.9
251
119
133
158.5
59.6
224
76
100.5
210
174
114.5
138
154
52.8
52.2
73
131.5
68.5
296
67.3
62.8
51.5
50.7
127
89.7
112
91.9
113
168.5
186.5
64
58.1
0.41
0.51
0.59
12.85
6.1
0.64
3.46
0.66
1.23
4.5
0.73
0.8
3.05
0.97
0.78
7.6
2.86
1.37
2.21
0.69
6.05
1.43
1.77
1.51
1.41
1.9
2.3
2.95
0.59
0.69
1.64
1.3
0.62
13.45
0.7
0.49
0.57
0.6
0.98
0.82
1.24
1.63
2.22
3.26
24.1
1.09
Page 6 of 14
ASX RELEASE | 5th December 2023
MSS0390
MSS0024
MSS0115
MSS0177
MSS0663
MSS0066
MSS0463
MSS0547
MSS0664
MSS0710
MSS0004
MSS0069
MSS0659
MSS0355
MSS0508
MSS0514
MSS0509
MSS0481
MSS0292
MSS0640
MSS0388
MSS0707
MSS0573
MSS0117
MSS0706
MSS0808
Tenement
E47/3468
E47/4309
E47/3339
P47/1762
P47/1787
P47/1788
P47/1789
P47/1790
P47/1791
P47/1792
P47/1793
P47/1794
P47/1795
E47/3181
P47/2024
Page 7 of 14
490868
488068
488868
489268
488270
488468
491268
492068
488270
488670
488068
488468
488270
490468
491668
491668
491668
491268
490068
492670
490868
488670
492468
488868
488670
491070
Holder
Pilbara
Gold
Corporatio
n Pty Ltd
(Raiden
Resources
Ltd.’s
100%
owned
subsidiary)
7690263
7691363
7690913
7691313
7691310
7691013
7690813
7690613
7691260
7690910
7690363
7691163
7691510
7691613
7689963
7690263
7690013
7691713
7691463
7689810
7690163
7691060
7690613
7691013
7691110
7691560
56.6
56.2
56
55.8
55.1
54.3
54.3
53.7
53.6
53.4
53.3
52.9
52.9
52.5
52.4
52.4
52.2
51.3
51.1
51
50.8
50.8
50.7
50.6
50.3
50.1
11.35
17
3.88
21.1
7.5
4.21
4.04
3.85
3.71
3.63
7.17
2.97
8.98
3.49
4.72
26.7
4.34
2.84
2.8
9.19
7.21
14.15
3.67
4.61
3.06
4.34
Table 2: Tenement Schedule
Grant Date
Expiry
Area
12/09/2017 11/09/2022
24/07/2020 23/07/2025
14/09/2016 13/09/2026
01/09/2016 31/08/2024
24/01/2017 23/01/2025
24/01/2017 23/01/2025
24/01/2017 23/01/2025
30/11/2018 29/11/2022
02/08/2018 01/08/2022
02/08/2018 01/08/2022
30/11/2018 29/11/2022
30/11/2018 29/11/2022
30/11/2018 29/11/2022
13/08/2015 12/08/2025
Application
1Bl
2Bl
1Bl
139 Ha.
188 Ha.
200 Ha.
148 Ha.
197 Ha.
177 Ha.
193 Ha.
197 Ha.
157 Ha.
146 Ha.
5Bl
5 Ha.
192.5
52.4
83.8
72.7
37.4
72
75.2
151.5
49.1
70.4
188.5
53.6
58
67
153
244
144
61.7
50
102
151.5
65.5
135.5
92.5
53
101
RDN Equity
%
100%
100%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
100%
1.09
0.63
0.65
0.46
1.51
0.61
1.27
1.14
0.67
1.26
2.36
1.1
0.98
0.74
2.72
7
3.58
0.71
0.68
1
0.79
1.41
1.58
0.5
1.35
1.17
Comment
Covered
by NAC
Heritage
Agreement
ASX RELEASE | 5th December 2023
JORC Code, 2012 Edition. Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has been done this would be relatively
simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such as where there is coarse gold
that has inherent sampling problems. Unusual commodities or mineralisation
types (eg submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries and
results assessed.
• Measures taken to maximise sample recovery and ensure representative nature
of the samples.
• Whether a relationship exists between sample recovery and grade and whether
sample bias may have occurred due to preferential loss/gain of fine/coarse
material.
• Soil samples was collected at 50m intervals
along north-south lines spaced 400m apart
from a consistent depth of 15-20cm with
approximately 200g collected and placed into
individually labelled paper Geochem packets.
• Samples were dispatched to ALS Global
Laboratories in Perth for analysis.
Drilling
techniques
Drill sample
recovery
Page 8 of 14
• In relation to this announcement no drilling by
Raiden has been conducted as yet and no
assays are being reported
• In relation to this announcement no drill
sampling by Raiden has been conducted as yet
and no assays are being reported
ASX RELEASE | 5th December 2023
Criteria
JORC Code explanation
Logging
• Whether core and chip samples have been geologically and geotechnically
• In relation to this announcement no drilling by
logged to a level of detail to support appropriate Mineral Resource estimation,
Raiden has been conducted as yet.
mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core taken.
• ALS Global have followed standard
• If non-core, whether riffled, tube sampled, rotary split, etc and whether
procedures for sample preparation to produce
sampled wet or dry.
sub-samples for analysis
• For all sample types, the nature, quality and appropriateness of the sample
•
The
laboratory reported the use of standards
preparation technique.
and blanks as part of the analyses for QA/QC
• Quality control procedures adopted for all sub-sampling stages to maximise
for determination of mineral content.
representivity of samples.
• No standards or blanks were submitted by the
• Measures taken to ensure that the sampling is representative of the in situ
company
material collected, including for instance results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to the grain size of the material being
sampled.
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Page 9 of 14
Commentary
• The nature, quality and appropriateness of the assaying and laboratory
• Laboratory procedures and assaying are
procedures used and whether the technique is considered partial or total.
considered appropriate by the CP for the type
of sample.
• For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
• Assaying of the soil samples was conducted
model, reading times, calibrations factors applied and their derivation, etc.
by ALS Global Laboratories in Perth using
their ME_ICP89 & ME_MS61 analysis
• Nature of quality control procedures adopted (eg standards, blanks, duplicates,
technique.
external laboratory checks) and whether acceptable levels of accuracy (ie lack
of bias) and precision have been established.
• The laboratory reported the use of standards
and blanks as part of the analyses for QA/QC.
• No standards or blanks were submitted by the
company but it is noted that ALS Global
insert laboratory standards and blanks as part
ASX RELEASE | 5th December 2023
Criteria
JORC Code explanation
Commentary
of their analysis.
Verification
of sampling
and
assaying
• The verification of significant intersections by either independent or alternative • All significant assay results have been
verified against the results reported by ALS
company personnel.
Global Perth by two experienced company
• The use of twinned holes.
personnel.
• Documentation of primary data, data entry procedures, data verification, data
• All primary data has been uploaded into the
storage (physical and electronic) protocols.
company’s data storage with standard data
• Discuss any adjustment to assay data.
entry protocols checked and verified by two
experienced company personnel.
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and downhole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Sample points were determined by hand held
GPS which is considered appropriate for the
reconnaissance nature of the sampling.
• Co-ordinates are provided in the Geocentric
Datum of Australia (GDA94) Zone 50.
Data
spacing and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the degree
of geological and grade continuity appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• Not applicable due to the reconnaissance
nature of the sampling.
• No attempt has been made to demonstrate
geological or grade continuity between
sample points.
Orientation
of data in
relation to
geological
structure
• Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
• If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
• Not applicable as in relation to this
announcement no drilling by Raiden has been
conducted as yet.
Sample
security
• The measures taken to ensure sample security.
• For the current sampling program the sample
chain of custody is managed by Raiden. All
samples were collected in the field at the
project site in number-coded calico
bags/secure labelled polyweave sacks by
Page 10 of 14
ASX RELEASE | 5th December 2023
Criteria
JORC Code explanation
Commentary
Raiden’s geological and field personnel. All
samples were delivered directly to the
associated carrier, RGR Road Haulage, by
Raiden personnel before being transported to
the ALS laboratory in Perth WA for final
analysis.
Audits or
reviews
• The results of any audits or reviews of sampling techniques and data.
• No review of the sampling techniques has
been undertaken.
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral tenement
and land tenure
status
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
• Raiden Resources Ltd tenements are located in the City of Karratha,
within the Pilbara region of Western Australia.
• The tenements are held by either by Raiden Resources Ltd 100%,
or Raiden Resources Ltd 80%/Welcome Exploration Pty Ltd 20%.
(see Appendix 1: Tenement Schedule for further detail).
• Tenements are located on the Mt Welcome pastoral lease.
• Raiden is not aware of any existing impediments nor of any
potential impediments which may impact ongoing exploration and
development activities at the project site.
Exploration done by
other parties
• Acknowledgment and appraisal of exploration by
other parties.
• A full search and compilation of historic exploration has been
completed.
• Work included stream sediment, soil and rock sampling, geological
mapping, geophysical surveys, drilling, resource estimation and
mining studies.
Geology
• Deposit type, geological setting and style of
mineralisation.
• Potential for lithium-caesium-tantalum bearing pegmatite
mineralisation.
Page 11 of 14
ASX RELEASE | 5th December 2023
Criteria
JORC Code explanation
Commentary
• The project area is underlain by the Archean Pilbara Craton,
specifically the West Pilbara Superterrane (WPST) of Hickman
(2016). The 3280-3070 Ma WPST comprises numerous
tectonostratigraphic packages (Sholl, Regal and Karratha Terranes
and the Whundo and Nickol River Basins) and igneous complexes
that have been variously affected by several tectonic events. The
easterly to east-north easterly trending Sholl Shear Zone (SSZ) is
a boundary for the regional rock packages. Metamorphic grade is
higher to the north of the SSZ, suggesting the present-day surface
shows a slightly deeper crustal level on the north side.
Drill hole
Information
• A summary of all information material to the
understanding of the exploration results including
a tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the case.
• Not applicable as in relation to this announcement no drilling by
Raiden has been conducted as yet.
Data aggregation
methods
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or minimum
• Not applicable as in relation to this announcement no drilling by
Raiden has been conducted as yet.
Page 12 of 14
ASX RELEASE | 5th December 2023
Criteria
JORC Code explanation
Commentary
grade truncations (eg cutting of high grades) and
cut-off grades are usually Material and should be
stated.
• Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown in
detail.
• The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Relationship
between
mineralisation
widths and intercept
lengths
• These relationships are particularly important in
the reporting of Exploration Results.
• If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should
be reported.
• If it is not known and only the down hole lengths
are reported, there should be a clear statement to
this effect (eg ‘down hole length, true width not
known’).
Diagrams
• Maps are included in the body of the announcement.
• Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for
any significant discovery being reported These
should include, but not be limited to a plan view of
drill hole collar locations and appropriate
sectional views.
Balanced reporting
• Where comprehensive reporting of all Exploration
Results is not practicable, representative
reporting of both low and high grades and/or
widths should be practiced to avoid misleading
Page 13 of 14
• Not applicable as in relation to this announcement no drilling by
Raiden has been conducted as yet.
• All reported results from other companies are as they have been
released to the ASX and are referenced at the end of this
announcement.
• This announcement discusses the findings of recent reconnaissance
ASX RELEASE | 5th December 2023
Criteria
Other substantive
exploration data
Further work
Page 14 of 14
JORC Code explanation
reporting of Exploration Results.
• Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations; geophysical
survey results; geochemical survey results; bulk
samples – size and method of treatment;
metallurgical test results; bulk density,
groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
• The nature and scale of planned further work (eg
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main geological
interpretations and future drilling areas, provided
this information is not commercially sensitive.
Commentary
sampling and associated assays.
• All the meaningful exploration data has been included in the body
of this announcement.
• Raiden are currently planning further field reconnaissance and
infill soil sampling programs to assess the potential for lithiumbearing pegmatites over its Mt Sholl North Project.
Share your feedback
Discover